Call us on 01332 864455

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Search in posts
Search in pages
Menu

FIRE SUPPRESSION

NOBEL FIRE SUPPRESSION

Nobel Stat ā€“ X condensed aerosol fire suppression systems are factory fitted, fully tested and certified by qualified Nobel installation engineers to all Star GB sliding head lathes.

The Stat-X units are sized for volume protection and are extremely compact, intensively efficient and cost effective to maintain. Units are environmentally friendly with zero ozone depletion and zero global warming potential.

In the event of a fire incident, dire detection and system activation is achieved either by the linear heat cable or manual activation through the remote call point. The control panel sends a fire signal to the unit ensuring suppression is rapidly achieved through interference between the ultra-fine aerosol particulate and the flames free radicals, immediately terminating propagation of fire. The Stat-X system has ultra-fast fire knock down and posseses long post fire security due to potassium aerosol being suspended in the air of the enclosure for up to an hour.

MAINTENANCE

Due to volatile working environment (when machining with cutting oil) it is vital the Stat-X unit is serviced on a regular basis. As the fire suppression unit is safety critical, only Nobel engineers can maintain/re-charge the unit. Star GB recommend all customers contact Nobel directly to arrange regular servicing.

During the service of the Stat-X unit, the following work will be carried out:


  • Check physical condition, location, fixings, security and warning labels of Stat-X unit
  • Check all mechanical connections to Stat-X unit
  • Check and test operation of fire detection and fixings (replace if needed)
  • Check all cable, connectors and junction boxes for signs of damage or wear
  • Test control panel actuation outputs and manual actuation point
  • Run full diagnostics on control panel and check shutdowns to machine operate and reset
  • Check back up batteries (replace if needed)
  • Reset control panel and commission system back into service (reset memory if applicable)

www.nobel-fire-systems.com

Tel: 01706 625777

Email: info@nobel-fire-systems.com

The FiretraceĀ® Fire Solution

FiretraceĀ® Limited manufacture simple fire suppression systems that operate without the need for electrical power or control panels.

The FiretraceĀ® solution uses a linear pressurised detection tube which is heat sensitive. Should the tubing sense heat or flame it will rupture and the resultant pressure loss will open a pneumatic valve and deploy extinguishant via fixed diffusers.

The system is complete with a volt free pressure operated switch which is interfaced to the protected machine to ensure it is automatically turned off in the event of a fire or fault.

In addition to being fully automatic the system can be activated remotely by simply striking a pneumatic plunger that releases the detection pressure and activates the system.

All FiretraceĀ® Systems are fully CE marked.

Maintenance

The FiretraceĀ® system requires annually servicing by a competent person. Firetrace Limited can arrange for this servicing or provide free training for the ownerā€™s nominated contractor.

The FiretraceĀ® tubing is resilient to cutting oils and unless physically damaged will last between 5-10 Years.

The Carbon Dioxide cylinder is also serviceable for 10 Years and has a date stamp to indicate when re-testing is required.

  • Simple highly reliable automatic fire suppression
  • Pneumatically operated with minimal moving parts
  • Works without external power or complicated control panels
  • Fail safe design and constant monitoring
  • Minimal maintenance requirements
  • 10 year system life
  • Easy to retrofit

www.firetrace.co.uk

Tel: 01473 744090

Email: info@firetrace.co.uk